ALP Lighting Components Inc
268350
Lithia Springs
GA
30122
<span style="font-size:12pt"><strong>STRAIGHT SIDE PRESSES</strong></span> <ul><li><span style="font-size:12pt">Yr 2003 - 400 Ton Komatsu #E2G400SWS3 Straight Side Press, 440 Ton Capacity; Stroke 10.2&#34;, Strokes per Minute 25-60 Variable, Bolster 61&#34; x 122&#34;; Windows 63&#34; [<a href="https://youtu.be/hw1vDzJrVeg" target="_blank" rel="nofollow noopener noreferrer">Video of Machine in Action</a>]</span></li><li><span style="font-size:12pt">Yr 1993 - 300 Ton Blow #SC2-300-144-48 Straight Side Press, Stroke 10&#34;, Bed 48&#34; x 144&#34;, Strokes per Minute 25-50; Windows 27&#34; Wide, Floor Standing;</span></li><li><span style="font-size:12pt">Yr 2005 - 200 Ton Komatsu #E2W200 Straight Side 2-Point Press, Stroke 9.84&#34;, SPM 30-55, Slide 72.83&#34; x 42.99&#34;, Bolster 84.64&#34; x 42.99&#34; x 7.08&#34;; Windows 34&#34; Wide, Floor Standing  [<a href="https://youtu.be/MNbinhLNpTg" target="_blank" rel="nofollow noopener noreferrer">Video of Machine in Action</a>]</span></li><li><span style="font-size:12pt">500 Ton Chicago Dreis &amp; Krump Permanently Flanged Press Brake; Bed approx. 168</span></li><li><span style="font-size:12pt">300 Ton Niagara #L-300-16-18 Permanently Flanged Press Brake, Stroke 6&#34;, Strokes per Minute 4-15, Bed 156&#34;</span></li><li><span style="font-size:12pt">150 Ton Verson #B-78-150 Permanently Flanged Press Brake, Stroke 5&#34;, Strokes per Minute 30, Bed 78&#34;</span></li></ul> <span style="font-size:12pt"><strong>GAP FRAME/OBI PRESSES</strong></span> <ul><li><span style="font-size:12pt">Yr 2006 - 165 Ton Komatsu 2-Point Gap Press, #OBW-150, Stroke 7.87&#34;, Strokes per Minute 35-65, Bed 62&#34; x 30&#34;  [<a href="https://youtu.be/OODHGDK3Uvw" target="_blank" rel="nofollow noopener noreferrer">Video of Machine in Action</a>]</span></li><li><span style="font-size:12pt">75 Ton #E75 Niagara OBI Press, Stroke 5&#34;, Strokes per Minute 54, Bed 24&#34; x 36&#34;, Slide Feed</span></li><li><span style="font-size:12pt">38 Ton Walsh OBI Press, #38, Stroke 3&#34;</span></li></ul> <span style="font-size:12pt"><strong>SERVO COIL FEED LINES</strong></span> <ul><li><span style="font-size:12pt">Rowe 20,000 Lb x 50” x .060” Servo Feed Line - Reel with Car - #20050-DSJ, Hold Down Arm, Travelling Coil Car; Straightener #C4-50, Peeler, Breaker Rolls, Capacity 50&#34; x .020&#34;-.060&#34;; Threading Table; Servo Feed - Capacity 50&#34; x .020&#34;-.060&#34;; Rexroth Control &amp; Drive</span></li><li><span style="font-size:12pt">Rowe 16,000 Lb Servo Feed Line – Rowe #16030-DSJ Uncoiler, 16,000 Lb Capacity x 30&#34; Wide; Rowe #B-20 Straightener, 20&#34; x .030-.105&#34; Capacity; Servo Feed #PM-LT3-224, S/N R34004, GE Fanuc Control, Capacity .010&#34;-.093&#34;</span></li><li><span style="font-size:12pt">Rowe 10,000 Lb Servo Feed Line - 10,000 Lb x 30&#34; x .016&#34;-.032&#34;; Reel with Car; Straightener; Thread Table; Servo Feed with Control console; Feed Line S/N R35102</span></li><li><span style="font-size:12pt">Rowe 10,000 Lb x 30” x .078” Servo Feed Line; Reel #10030-DSJ, Capacity 10,000 Lb x 30&#34; Wide, Travelling Coil Car; Straightener #B-30, Capacity 30&#34; x .078&#34;; 8&#39; Threading Table, #PTS-30; Servo Feed #PM-LT3-230, Capacity 30&#34; x .078&#34;; GE/Fanuc Control; Serial #R-33471</span></li><li><span style="font-size:12pt">Rowe 10,000 Lb x 24&#34; x .032&#34; Capacity Servo Feed Line; Reel #10024-DSJ; Coil Car;; Straightener #A3-24; Uncoiler; Servo Feed #PM-EAC-073-230 - Updated Rexroth System 200 Control</span></li><li><span style="font-size:12pt">Regal Uncoiler 10,000 Lb x 24&#34; Wide; Regal Straightener - 30&#34; wide x .075&#34;; Thread Table; Rowe Servo Feed, #PM LT3 230, Capacity 30&#34; x .010&#34;-.078&#34;; GE Fanuc Control</span></li><li><span style="font-size:12pt">Cooper Weymouth Peterson 8,000 Lb x 12” x .078” Servo Feed Line: 8,000 Lb x 12&#34; W x .018&#34;-.078&#34;; Reel; Straightener; Threading Table; Servo Feed; Feed #SMVI 12, Capacity 12&#34; x .078&#34;, S/N C-36303</span></li><li><span style="font-size:12pt">Rowe 7,500 Lb Servo Feed Line; Rowe #7520 Reel, 7,500 Lb x 20” Wide; Rowe #B-20 Straightener, Capacity 20&#34; x .030&#34;-.150&#34;; Servo Feed #PM-LT3-224, S/N R33884, Capacity 24&#34; x .010&#34;-.093&#34;, GE Fanuc Control</span></li><li><span style="font-size:12pt">Rowe 7,500 Lb Uncoiler, #7520-DSJ, 20&#34; Wide</span></li><li><span style="font-size:12pt">Rowe #B-20 Straightener, Capacity 20&#34; x .030&#34;-.105&#34;</span></li><li><span style="font-size:12pt">4 Ton Coil Upender</span></li></ul> <span style="font-size:12pt"><strong>RAFTED ROLL FORMERS</strong></span> <ul><li><span style="font-size:12pt">Yr 2002 - 14 Stand Yoder #QVW-150 Rafted Roll Former - 14 Stand; 8 Stand/6 Stand; Spindle Dia 1-1/2&#34;, Rollspace 20&#34;, HC 11&#34;, VC 4-7&#34;, 20 HP Reliance AC Inverter; Universal Drive; (2) Extra Rafts - each with 6 Stands; S/N Y-10934-0907</span></li><li><span style="font-size:12pt">11 Stand Ardcor Rafted Roll Former, Spindle Dia 1.5&#34;, Rollspace 12&#34;, HC 7&#34;, VC 3&#34; to 4-1/2&#34;, Vari-Speed; Universal Drive</span></li><li><span style="font-size:12pt">13 Stand Dahlstrom Rollformer on 16 Stand Base, #360-16-OB, Spindle Dia 1.75&#34;, Rollspace 20&#34;, HC 8&#34;</span></li></ul> <span style="font-size:12pt"><strong>FABRICATING EQUIPMENT</strong></span> <ul><li><span style="font-size:12pt">Yr 2013 - DMS 5-Axis CNC, Router, Table 36&#34; x 48&#34; (2 tables), 10 Position Tool Holder, Fagor CNC Control, #505i-2-3-30TCOLRS, S/N DMS 2417  [<a href="https://youtu.be/g9HxT_KZCKc" target="_blank" rel="nofollow noopener noreferrer">Video of Machine in Action</a>]</span></li><li><span style="font-size:12pt">Yr 2002 - Trump #2010R 20 Ton CNC Turret Punch, Type 90951  [<a href="https://youtu.be/rUcYTwSkhhI" target="_blank" rel="nofollow noopener noreferrer">Video of Machine in Action</a>]</span></li><li><span style="font-size:12pt">100 Ton Niagara #HBM-100-8-10 Hydraulic Press Brake, Cap 10&#39; x 10 gauge / 4&#39; 6&#34; x 5/16&#34;</span></li><li><span style="font-size:12pt">90 Ton Cincinnati #90CB x 6&#39; Hydraulic Press Brake</span></li><li><span style="font-size:12pt">Yr 2006 - 60 Ton Accurpress #7608 Advantage CNC Press Brake, O/A 8&#39;, Accupress Back Gauge - Power In/Out, Up/Down, Fingers, ETS 3000 Control &amp; Pedestal  [<a href="https://youtu.be/IlLpnjS88BY" target="_blank" rel="nofollow noopener noreferrer">Video of Machine in Action</a>]</span></li><li><span style="font-size:12pt">55 Ton Niagara #HB-55-4-6 Hydraulic Press Brake, Automec CNC150 Autogage Control, Automec Back Gauge</span></li><li><span style="font-size:12pt">(2) Yr 2008 &amp; 2003 - 25 Ton Accurpress #7254 CNC Press Brakes, Accurpress Back Gauge with 4 Fingers, ISB Light Curtain, 54&#34; O/A, ETS Console Control  [<a href="https://youtu.be/PBx0f4q6FUg" target="_blank" rel="nofollow noopener noreferrer">Video of 2008 Machine in Action</a>] [<a href="https://youtu.be/yb1LkI3VcH0" target="_blank" rel="nofollow noopener noreferrer">Video of 2003 Machine in Action</a>]</span></li><li><span style="font-size:12pt">(2) Fasti #145-18-0.75 Profile Bending Machine, Capacity 1860 mm x 0.75 mm; HMI Control</span></li><li><span style="font-size:12pt">5’ x 10 Gauge Betenbender Squaring Shear, FOPBG</span></li><li><span style="font-size:12pt">M&amp;M Metaltronic Trac Spinner; Qty Wilton Press Brake Dies; Uni-Punch Dies</span></li></ul> <span style="font-size:12pt"><strong>CNC EDM, TURNING CENTER &amp; VERTICAL MACHINING CENTERS</strong></span> <ul><li><span style="font-size:12pt">Yr 2008 Fanuc Robocut EDM, Fanuc Series 310iS-WA CNC Control; Chamber/Travel: X-23.6&#34;, Y-15.7&#34;  [<a href="https://youtu.be/JRg5pi4_5kE" target="_blank" rel="nofollow noopener noreferrer">Video of Machine in Action</a>]</span></li><li><span style="font-size:12pt">Daewoo Puma #250 CNC Turning Center, Fanuc Series 18-T Control, Kitigawa B212 Chuck, Tail Stock, 10-Position Turret, Max Bar 3&#34;</span></li><li><span style="font-size:12pt">Yr 2001 - Fadal #5020A Vertical Machining Center, Fadal CNC Control</span></li><li><span style="font-size:12pt">Cincinnati Arrow 2000 Vertical Machining Center, Table 30&#34; x 86&#34;; GE Fanuc 18i-M CNC Control</span></li></ul> <span style="font-size:12pt"><strong>TOOL ROOM EQUIPMENT</strong></span> <ul><li><span style="font-size:12pt">Okamoto Grind-X #ACC 16-32ST Automatic Surface Grinder</span></li><li><span style="font-size:12pt">(2) Yr 2013/2014 - Sharp #LMV-50 Vertical Milling Machines, Power Feed Table, Acu-Rite DRO</span></li><li><span style="font-size:12pt">LeBlond 13&#34; x 40&#34; Engine Lathe; older Hercules Ajax/Mazak 16&#34; x 80&#34; Engine Lathe</span></li><li><span style="font-size:12pt">Mattison 18” x 72 Surface Grinder; 5&#39; x 15&#34; Carlton Radial Arm Drill, Box Table; Harig #618 Surface Grinder; Vextrax #JL-818SA Surface Grinder; Miller Matic 250X Wire Welder; Miller Syncrowave 250 Welder; Miller Syncrowave 250DX Welder; KH Huppert Type ST Oven; Henkel Rod Oven; Welding Table</span></li><li><span style="font-size:12pt">Spray Booth - Approx. 4&#39; W x 3&#39; D x 6&#39; H; (3) Paint Pots; (3) Paint Nozzles; Load Table</span></li><li><span style="font-size:12pt">Bar Rack &amp; Material; Die Springs &amp; Components; Wellsaw #1348 Horizontal Band Saw, 3 HP, S/N 4805; Cyclone Blast Cabinet; Trinco #36/BP Blast Cabinet; Grob #4V-24 Vertical Band Saw; 45 Ton H-Frame Hydraulic Shop Press; 4-Post Hydraulic Trim Presses; Neff Hydraulic Press</span></li></ul> <span style="font-size:12pt"><strong>BRIDGE CRANE SYSTEM</strong></span> <ul><li><span style="font-size:12pt">Lafayette 10 Ton Capacity Crane Cell; Dual Girder Top Running Bridge Crane, Span Approx. 45&#39; x Length Approx. 260&#39; x Height Approx 24&#39;; 6-Way Pendant; Crane Supports &amp; Runway</span></li></ul> <span style="font-size:12pt"><strong>ROLLING STOCK</strong></span> <ul><li><span style="font-size:12pt">Yr 2014 - JLG #E300 AJP Electric Boom Lift</span></li><li><span style="font-size:12pt">(4) Drexel #SLT30AC &amp; SLT30 Swing-Mast Electric Forklift</span></li><li><span style="font-size:12pt">Yale #GLC100MGNGAE058 - 10,000 Lb LP Type Forklift, Hours 6020, Side Shift, 3-Stage Mast, Max Lift 176&#34;</span></li><li><span style="font-size:12pt">(2) Toyota #7FGCU45 – 9,000 Lb Capacity LP Type Forklifts; Hours 1628; Side Shift, 3-Stage Mast, Max Lift 171&#34; &amp; 199”</span></li><li><span style="font-size:12pt">(2) Toyota #8FGCU25 - 5,000 Lb Capacity LP Type Forklifts, Hours 5191; Side Shift, 3-Stage Mast, Max Lift 189&#34;</span></li><li><span style="font-size:12pt">(2) Yale #GLCO50RGNUAE084 - 5,000 Lb Capacity Forklifts, LP Type, 3-Stage Mast; Max Lift 194&#34;</span></li><li><span style="font-size:12pt">Heli #CPYD25C-M1H – 4,650 Lb Capacity Forklift, LP Type, 3-Stage Mast; Max Lift 185&#34; &amp; 195”</span></li><li><span style="font-size:12pt">Nissan #40 Electric Type Forklift, Capacity 2,475 Lbs; #G1N1L20V, Max Lift 240”</span></li><li><span style="font-size:12pt">(3) Raymond #EASI-OPC30TT Stand Up Type Lifts</span></li><li><span style="font-size:12pt">Advance Condor X45300 Rider Type Floor Scrubber, Type E, Ecoflex</span></li><li><span style="font-size:12pt">(4) Electric Battery Chargers; Club Car Golf Cart</span></li></ul> <span style="font-size:12pt"><strong>PLANT FACILITIES</strong></span> <ul><li><span style="font-size:12pt">(230) Sections Pallet Racking - Size 10&#39; W x 42&#34; D x Approx. 22&#39; H &amp; 18’ H; (17) Die Rack Sections;(2) Wulftec Pallet Stretch Wrappers, #WSMH-150-S;(2) 40’ Connex Containers; Rousseau Multi-Drawer Storage Cabinets to 60” Wide; MRO/Spares/Parts Crib - including Hand Tools, Shop Tools, Electronics, Drives, Parts, Motors, Pumps; Lifting Magnet; 18&#34; Hand Brake; Wilton Drill Press</span></li></ul>
Tue Apr 23 10:00:00 CDT 2024
Tue, 4/23/24
Tue Apr 23 10:00:00 CDT 2024

Date & Time

Tue, Apr 23, 202410:00 AM US/Eastern

Preview

Monday, April 22nd from 9am to 4pm or by appointment

Type

WEBCAST ONLY

Buyers Premium

20.0%

ALP Lighting Components Inc

Complete Plant Closure with Late Model Stamping Presses, Servo Feed Lines, Rollforming, CNC Press Brakes, Late Model Rolling Stock & Tool Room

Details

STRAIGHT SIDE PRESSES
  • Yr 2003 - 400 Ton Komatsu #E2G400SWS3 Straight Side Press, 440 Ton Capacity; Stroke 10.2", Strokes per Minute 25-60 Variable, Bolster 61" x 122"; Windows 63" [Video of Machine in Action]
  • Yr 1993 - 300 Ton Blow #SC2-300-144-48 Straight Side Press, Stroke 10", Bed 48" x 144", Strokes per Minute 25-50; Windows 27" Wide, Floor Standing;
  • Yr 2005 - 200 Ton Komatsu #E2W200 Straight Side 2-Point Press, Stroke 9.84", SPM 30-55, Slide 72.83" x 42.99", Bolster 84.64" x 42.99" x 7.08"; Windows 34" Wide, Floor Standing  [Video of Machine in Action]
  • 500 Ton Chicago Dreis & Krump Permanently Flanged Press Brake; Bed approx. 168
  • 300 Ton Niagara #L-300-16-18 Permanently Flanged Press Brake, Stroke 6", Strokes per Minute 4-15, Bed 156"
  • 150 Ton Verson #B-78-150 Permanently Flanged Press Brake, Stroke 5", Strokes per Minute 30, Bed 78"
GAP FRAME/OBI PRESSES
  • Yr 2006 - 165 Ton Komatsu 2-Point Gap Press, #OBW-150, Stroke 7.87", Strokes per Minute 35-65, Bed 62" x 30"  [Video of Machine in Action]
  • 75 Ton #E75 Niagara OBI Press, Stroke 5", Strokes per Minute 54, Bed 24" x 36", Slide Feed
  • 38 Ton Walsh OBI Press, #38, Stroke 3"
SERVO COIL FEED LINES
  • Rowe 20,000 Lb x 50” x .060” Servo Feed Line - Reel with Car - #20050-DSJ, Hold Down Arm, Travelling Coil Car; Straightener #C4-50, Peeler, Breaker Rolls, Capacity 50" x .020"-.060"; Threading Table; Servo Feed - Capacity 50" x .020"-.060"; Rexroth Control & Drive
  • Rowe 16,000 Lb Servo Feed Line – Rowe #16030-DSJ Uncoiler, 16,000 Lb Capacity x 30" Wide; Rowe #B-20 Straightener, 20" x .030-.105" Capacity; Servo Feed #PM-LT3-224, S/N R34004, GE Fanuc Control, Capacity .010"-.093"
  • Rowe 10,000 Lb Servo Feed Line - 10,000 Lb x 30" x .016"-.032"; Reel with Car; Straightener; Thread Table; Servo Feed with Control console; Feed Line S/N R35102
  • Rowe 10,000 Lb x 30” x .078” Servo Feed Line; Reel #10030-DSJ, Capacity 10,000 Lb x 30" Wide, Travelling Coil Car; Straightener #B-30, Capacity 30" x .078"; 8' Threading Table, #PTS-30; Servo Feed #PM-LT3-230, Capacity 30" x .078"; GE/Fanuc Control; Serial #R-33471
  • Rowe 10,000 Lb x 24" x .032" Capacity Servo Feed Line; Reel #10024-DSJ; Coil Car;; Straightener #A3-24; Uncoiler; Servo Feed #PM-EAC-073-230 - Updated Rexroth System 200 Control
  • Regal Uncoiler 10,000 Lb x 24" Wide; Regal Straightener - 30" wide x .075"; Thread Table; Rowe Servo Feed, #PM LT3 230, Capacity 30" x .010"-.078"; GE Fanuc Control
  • Cooper Weymouth Peterson 8,000 Lb x 12” x .078” Servo Feed Line: 8,000 Lb x 12" W x .018"-.078"; Reel; Straightener; Threading Table; Servo Feed; Feed #SMVI 12, Capacity 12" x .078", S/N C-36303
  • Rowe 7,500 Lb Servo Feed Line; Rowe #7520 Reel, 7,500 Lb x 20” Wide; Rowe #B-20 Straightener, Capacity 20" x .030"-.150"; Servo Feed #PM-LT3-224, S/N R33884, Capacity 24" x .010"-.093", GE Fanuc Control
  • Rowe 7,500 Lb Uncoiler, #7520-DSJ, 20" Wide
  • Rowe #B-20 Straightener, Capacity 20" x .030"-.105"
  • 4 Ton Coil Upender
RAFTED ROLL FORMERS
  • Yr 2002 - 14 Stand Yoder #QVW-150 Rafted Roll Former - 14 Stand; 8 Stand/6 Stand; Spindle Dia 1-1/2", Rollspace 20", HC 11", VC 4-7", 20 HP Reliance AC Inverter; Universal Drive; (2) Extra Rafts - each with 6 Stands; S/N Y-10934-0907
  • 11 Stand Ardcor Rafted Roll Former, Spindle Dia 1.5", Rollspace 12", HC 7", VC 3" to 4-1/2", Vari-Speed; Universal Drive
  • 13 Stand Dahlstrom Rollformer on 16 Stand Base, #360-16-OB, Spindle Dia 1.75", Rollspace 20", HC 8"
FABRICATING EQUIPMENT
  • Yr 2013 - DMS 5-Axis CNC, Router, Table 36" x 48" (2 tables), 10 Position Tool Holder, Fagor CNC Control, #505i-2-3-30TCOLRS, S/N DMS 2417  [Video of Machine in Action]
  • Yr 2002 - Trump #2010R 20 Ton CNC Turret Punch, Type 90951  [Video of Machine in Action]
  • 100 Ton Niagara #HBM-100-8-10 Hydraulic Press Brake, Cap 10' x 10 gauge / 4' 6" x 5/16"
  • 90 Ton Cincinnati #90CB x 6' Hydraulic Press Brake
  • Yr 2006 - 60 Ton Accurpress #7608 Advantage CNC Press Brake, O/A 8', Accupress Back Gauge - Power In/Out, Up/Down, Fingers, ETS 3000 Control & Pedestal  [Video of Machine in Action]
  • 55 Ton Niagara #HB-55-4-6 Hydraulic Press Brake, Automec CNC150 Autogage Control, Automec Back Gauge
  • (2) Yr 2008 & 2003 - 25 Ton Accurpress #7254 CNC Press Brakes, Accurpress Back Gauge with 4 Fingers, ISB Light Curtain, 54" O/A, ETS Console Control  [Video of 2008 Machine in Action] [Video of 2003 Machine in Action]
  • (2) Fasti #145-18-0.75 Profile Bending Machine, Capacity 1860 mm x 0.75 mm; HMI Control
  • 5’ x 10 Gauge Betenbender Squaring Shear, FOPBG
  • M&M Metaltronic Trac Spinner; Qty Wilton Press Brake Dies; Uni-Punch Dies
CNC EDM, TURNING CENTER & VERTICAL MACHINING CENTERS
  • Yr 2008 Fanuc Robocut EDM, Fanuc Series 310iS-WA CNC Control; Chamber/Travel: X-23.6", Y-15.7"  [Video of Machine in Action]
  • Daewoo Puma #250 CNC Turning Center, Fanuc Series 18-T Control, Kitigawa B212 Chuck, Tail Stock, 10-Position Turret, Max Bar 3"
  • Yr 2001 - Fadal #5020A Vertical Machining Center, Fadal CNC Control
  • Cincinnati Arrow 2000 Vertical Machining Center, Table 30" x 86"; GE Fanuc 18i-M CNC Control
TOOL ROOM EQUIPMENT
  • Okamoto Grind-X #ACC 16-32ST Automatic Surface Grinder
  • (2) Yr 2013/2014 - Sharp #LMV-50 Vertical Milling Machines, Power Feed Table, Acu-Rite DRO
  • LeBlond 13" x 40" Engine Lathe; older Hercules Ajax/Mazak 16" x 80" Engine Lathe
  • Mattison 18” x 72 Surface Grinder; 5' x 15" Carlton Radial Arm Drill, Box Table; Harig #618 Surface Grinder; Vextrax #JL-818SA Surface Grinder; Miller Matic 250X Wire Welder; Miller Syncrowave 250 Welder; Miller Syncrowave 250DX Welder; KH Huppert Type ST Oven; Henkel Rod Oven; Welding Table
  • Spray Booth - Approx. 4' W x 3' D x 6' H; (3) Paint Pots; (3) Paint Nozzles; Load Table
  • Bar Rack & Material; Die Springs & Components; Wellsaw #1348 Horizontal Band Saw, 3 HP, S/N 4805; Cyclone Blast Cabinet; Trinco #36/BP Blast Cabinet; Grob #4V-24 Vertical Band Saw; 45 Ton H-Frame Hydraulic Shop Press; 4-Post Hydraulic Trim Presses; Neff Hydraulic Press
BRIDGE CRANE SYSTEM
  • Lafayette 10 Ton Capacity Crane Cell; Dual Girder Top Running Bridge Crane, Span Approx. 45' x Length Approx. 260' x Height Approx 24'; 6-Way Pendant; Crane Supports & Runway
ROLLING STOCK
  • Yr 2014 - JLG #E300 AJP Electric Boom Lift
  • (4) Drexel #SLT30AC & SLT30 Swing-Mast Electric Forklift
  • Yale #GLC100MGNGAE058 - 10,000 Lb LP Type Forklift, Hours 6020, Side Shift, 3-Stage Mast, Max Lift 176"
  • (2) Toyota #7FGCU45 – 9,000 Lb Capacity LP Type Forklifts; Hours 1628; Side Shift, 3-Stage Mast, Max Lift 171" & 199”
  • (2) Toyota #8FGCU25 - 5,000 Lb Capacity LP Type Forklifts, Hours 5191; Side Shift, 3-Stage Mast, Max Lift 189"
  • (2) Yale #GLCO50RGNUAE084 - 5,000 Lb Capacity Forklifts, LP Type, 3-Stage Mast; Max Lift 194"
  • Heli #CPYD25C-M1H – 4,650 Lb Capacity Forklift, LP Type, 3-Stage Mast; Max Lift 185" & 195”
  • Nissan #40 Electric Type Forklift, Capacity 2,475 Lbs; #G1N1L20V, Max Lift 240”
  • (3) Raymond #EASI-OPC30TT Stand Up Type Lifts
  • Advance Condor X45300 Rider Type Floor Scrubber, Type E, Ecoflex
  • (4) Electric Battery Chargers; Club Car Golf Cart
PLANT FACILITIES
  • (230) Sections Pallet Racking - Size 10' W x 42" D x Approx. 22' H & 18’ H; (17) Die Rack Sections;(2) Wulftec Pallet Stretch Wrappers, #WSMH-150-S;(2) 40’ Connex Containers; Rousseau Multi-Drawer Storage Cabinets to 60” Wide; MRO/Spares/Parts Crib - including Hand Tools, Shop Tools, Electronics, Drives, Parts, Motors, Pumps; Lifting Magnet; 18" Hand Brake; Wilton Drill Press

Removal Info

Rigging is by appointment only Monday-Friday 8am-4pm beginning Wednesday April 24. Last day of removal is May 24 2024.

Please contact for removal:

Brendan Morris
(734) 735-0075
Brenden@Auctionreadyllc.com


 


Approved Contractors:

Riggers:

Gorham Industrial, LLC
- 200 Jasmine LN. Windsor, SC 29856
- Contact: James Gorham
- (803) 640-8360 (Office)
- (803) 617-8434 (Mobile)
james@gorhamindustrial.com

Transportation Services:

Alliance Trucking, Inc.
- 1209 Stowe Ave, Medford, OR 97501
- Contact: Christopher "Woody" Pomeroy
- 800-977-5623 x209 (Office)
- 616-550-5286 (Cell)
- 541-734-7009 (Fax)
Chris.P@alliancetrucking.com

Alpha Lane Logistics
- 10940 Parallel Parkway Ste K Box 235, Kansas City, KS 66109
- Contact: Dawn Ross
- 866-922-8855 x117 (Toll Free)
- 913-951-4717 (Mobile)
d.ross@nationwidetrans.com

Miami Global Lines
- 140 Ethel Rd West, Unit S&T, Piscataway, NJ 08854
- Contact: Allan Willcockson
- 732-640-2365 x 4155 (Direct)
- 908-416-1323 (Mobile)
AllanW@MiamiGlobalLines.com

Nova Shipping (Ocean, Air, Trucking)
- 6960 Orchard Lake Rd, West Bloomfield, MI, 48322
- Contact: Katya Dochenetz
- 248-562-7132 (Office)
- 248-818-4566 (Cell)
katya@nova-shipping.com
 

Location

1401 Blairs Bridge Rd Lithia Springs , GA , 30122  

Contact

Customer Service
CustomerService@maynards.com

Download