Timken Steel
182056
Canton
OH
NONE
<span style="font-size:11pt"><strong><u><span style="font-size:12pt">General Specifications:</span></u></strong><br /> <span style="font-size:10.5pt">OD Range: 1.90&#34;-6.75&#34; (48mm-172mm)</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">(with Exception of the Hole in the Elongator Drive, the Mill is Capable of Producing 7&#34; Diameter Tube)<br /> ID Range: 1&#34;-4.25&#34; (25mm-108mm)<br /> Maximum Lengths: </span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">34&#39; (10m) (Cooling Bed Product)<br /> 32&#39; (9.75m) (Mill Anneal Product)</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Billet Sizes:</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Diameter- 3.25&#34;-7.5&#34;<br /> Lengths- 3&#39;-6&#34;-13&#39;</span></span><br /> <br /> <span style="font-size:11pt"><strong><span style="font-size:12pt">Complete Line with the Following Components:</span></strong></span><br /> <span style="font-size:11pt"><strong><u><span style="font-size:12pt">Entry Billet Loader</span></u></strong><br /> <br /> <strong><u><span style="font-size:12pt">Rotary Furnace</span></u></strong><br /> <span style="font-size:10.5pt">Heating Capacity - 65 Tons per Hour<br /> Maximum Number of Billets per Hour - 300<br /> Hearth Diameter - 62&#39;<br /> Hearth Width - 15&#39;-0&#34;<br /> Hearth Chamber Height - 4&#39;-0&#34;<br /> Zones of Heating - 5<br /> Baffle Walls - 4<br /> Charging and Discharging Machine Maximum Cycles per Minute – 5<br /> Regen Burners (Bloom) Zones 3 &amp; 4 (2008)<br /> Regen Burners (Bloom) Zones 5 &amp; 6 (2019)</span><br /> <br /> <strong><u><span style="font-size:12pt">Billet Centering Press</span></u></strong><br /> <span style="font-size:10.5pt">Piercing Capacity - 60 Tons<br /> Maximum Stroke - 6&#34;<br /> Clamping Ram Capacity - 185 Tons<br /> Maximum Stroke - 16&#34;<br /> Main Hydraulic Pump - 34.7 G.P.M. at 2,500 P.S.I.<br /> Auxiliary Hydraulic Pump - 25 G.P.M. at 50 P.S.I.<br /> Main Pump Motor - 40 H.P., A.C., 1200 R.P.M.<br /> Hydraulic Fluid - Water Glycol<br /> Billet Clamp Size Range - 3-3/4&#34; to 8&#34; Diameter<br /> Centering Punch Diameter - 1&#34; and 1-1/4&#34; - Graph-Air<br /> Modifications made to punch/bolster assy. 2005</span><br /> <br /> <strong><u><span style="font-size:12pt">Piercing Mill</span></u></strong><br /> <span style="font-size:10.5pt">Rotation: Looking into the Mill from the Outlet Side, Tube Rotates Clockwise<br /> Rebuilt No. 3 Tube Mill Piercing Mill (1960)<br /> Roll Diameter - 29&#34;-36&#34; Tube<br /> Roll Face - 20&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Feed Angle - 0 to 10<br /> Motor - 2,000 H.P., D.C.<br /> Motor Drive - Reliance Electric<br /> Motor R.P.M. - 250 to 465<br /> Gear Reduction Ratio - 4.8 to 1<br /> Roll R.P.M. - 52.4 to 97.4<br /> Maximum Billet Length In - 15&#39;-0&#34;<br /> Maximum Shell Length Out - 18&#39;-0&#34;<br /> Outlet Table replaced with 3-Roll Outlet Guides in 2003 (Mannesmann-Demag)<br /> Bar Diameter - 1-3/4&#34; to 4-1/2&#34;</span><br /> <br /> <strong><u><span style="font-size:12pt">Transval Elongator</span></u></strong></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Installed 1971 &#64; No. 2 Tube Mill; (Moved to No. 4 Tube Mill June, 1990)</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Mill Assembly with Rolls - 26.7 Tons</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Drive Assembly - 51 Tons</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll Diameter - 14&#34; to 18&#34; Diameter (Standard Chocks)</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll Diameter - 12.5&#34; to 14&#34; Diameter (Offset Chocks)</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll Face - 12&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Angle of Feed - 0 to 16</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Angle of Conic - 3</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor - 2500 H.P., D.C.</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor Drive - Reliance Electric</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor R.P.M. - 300 - 650</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Gear Reduction Ratio - 2 to 1</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll R.P.M. - 0 to 325 R.P.M.</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Maximum Shell Length In - 18&#39;-0&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Maximum Shell Length Out - 30&#39;-0&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Mandrel Bar Diameter - 1-3-8&#34; - 4-1/2&#34; Diameter</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">1/4&#34; Roll Hump - 1200 Ton Roll Life</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Run: High Carbon and Bearing Steels</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">No Stainless, Graphitic, or Sulfur</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">13:1 D/T Maximum (19:1 Experimental)</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">2-1/4&#34; to 6-3/4&#34; Shell Diameter Out</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">3-1/4&#34; to 6-3/4&#34; Shell Diameter In</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">2-1/2 - 3 Ft./Sec. Thruput - 15 Sec. Cycle</span></span><br /> <br /> <span style="font-size:11pt"><strong><u><span style="font-size:12pt">Induction Furnace</span></u></strong><br /> <span style="font-size:10.5pt">Converters - 2 - (1125KW), 1KHZ<br /> Transformers - 2 - 1260KVA - 2400V Primary/720V Secondary<br /> Number of Coils - 2 - 10&#34; I.D., 130&#34; Long Induction Heating Coils<br /> PLC or Computer - Infrared Temperature Controlling Systems With Proportional Controller and Analog Readout<br /> Evaporative Water System - 473 GPM Evaporative Cooler - System Includes Nonferrous Core<br /> Pump Station - Duplex Pumps and Accessories w/Automatic Switching - Nonferrous System</span></span><br /> <br /> <span style="font-size:11pt"><strong><u><span style="font-size:12pt">Chain Transfer to Reducing Mill</span></u></strong></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor - 5 H.P., A.C.</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor R.P.M. - 1,200</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Gear Reduction Ratio - 31.5 to 1</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Chain Speed F.P.M. - 217</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Maximum Tube Lengths - 30&#39;-0&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Minimum Tube Lengths - 10&#39;-0&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Transfer Length - 9&#39;-1&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Transfer Width - 30&#39;-0&#34;</span></span><br /> <br /> <span style="font-size:11pt"><strong><u><span style="font-size:12pt">10 Stand Reducing Mill</span></u></strong></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll Diameter - 14.281 to 15.161</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll Face - 9&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Reduction Per Stand - 4%</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor - 500 H.P., A.C.</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor R.P.M. - 600</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll R.P.M. - Stand No. 1 - 45.085</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll R.P.M. - Stand No. 10 - 52.677</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Average R.P.M. Increase Between Stands - 1.714%</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">O.D. Tube Leaving Mill - 1.900&#34; to 6-3/4&#34;</span></span><br /> <br /> <span style="font-size:11pt"><strong><u><span style="font-size:12pt">Rotary Sizing Mill</span></u></strong></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Rotation: Looking into the Mill from the Outlet Side, Tube Rotates Counterclockwise</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll Diameter - 28&#34; to 30&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll Face - 13&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Angle of Feed - 7 (Original) Modified to 8° - approx. 1990</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Angle of Conic - 40</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motors (2) - 75 H.P., D.C.</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor R.P.M. - 515/1,300</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Gear Reduction Ratio - 9 to 1</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Roll R.P.M. - 57.2 to 144.4</span></span><br /> <br /> <span style="font-size:11pt"><strong><u><span style="font-size:12pt">Tilting Hot Saw</span></u></strong></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Blade Diameter - 37-1/2&#34; to 42&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Blade Drive Motor - 60 H.P., A.C.</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Blade Drive Motor R.P.M. - 600</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Saw Arbor R.P.M. - 1299</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Circulating Oil Lubrication for Saw Arbor</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Endless Flat Belt Drive</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Tilting / Cut feed cylinder – 3” bore x 13’ stroke hydraulic</span></span><br /> <br /> <span style="font-size:11pt"><strong><u><span style="font-size:12pt">Cooling Bed</span></u></strong></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Chain, Pusher Type</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Width - 31&#34; - 6-3/4&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Length - 50&#39;-0&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor - 7-1/2 H.P., D.C.</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor R.P.M. - 500/2,000</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Gear Reduction Ratio - 2552 to 1</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Maximum Chain Speed - 60.2&#34; per Minute</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Minimum Chain Speed - 14.9&#34; per Minute</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Max. Shell Length 34&#39;-0&#34;</span></span><br /> <br /> <span style="font-size:11pt"><strong><u><span style="font-size:12pt">Hot Anneal Furnace</span></u></strong></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Hearth Width - 34&#39;-3&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Hearth Length - 45&#39;-9&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor - 3/5 H.P., D.C.</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Motor R.P.M. - 400/1,600</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Total Gear Reduction - 13725 to 1</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Chain Travel Speed - 2.5&#34; to 10&#34; per Minute</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Maximum Tube Length - 32&#39;-0&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Minimum Tube Length - 10&#39;-0&#34;</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Shuffle Bar Exit Unit</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Added Flame Safe Burners in 2015</span></span><br /> <br /> <span style="font-size:11pt"><strong><u><span style="font-size:12pt">In Line Inspection Equipment</span></u></strong></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">In-line DVG Hot OD Gauge (by Timken). 2 Source Gamma Ray Wall Gauge by IMS.</span></span><br /> <span style="font-size:11pt"><span style="font-size:10.5pt">Installed Feb. 2011, operational July 2011.</span></span><br /> <br />  
Mon May 31 10:00:00 CDT 2021
Mon, 5/31/21
Mon May 31 10:00:00 CDT 2021
  • General
  • Lots
  • Gallery

Date & Time

Ongoing

Preview

By Appointment Only.

Timken Steel

6-3/4” (172mm) Complete Seamless Pipe Line for Sale

Details

General Specifications:
OD Range: 1.90"-6.75" (48mm-172mm)

(with Exception of the Hole in the Elongator Drive, the Mill is Capable of Producing 7" Diameter Tube)
ID Range: 1"-4.25" (25mm-108mm)
Maximum Lengths:

34' (10m) (Cooling Bed Product)
32' (9.75m) (Mill Anneal Product)

Billet Sizes:
Diameter- 3.25"-7.5"
Lengths- 3'-6"-13'


Complete Line with the Following Components:
Entry Billet Loader

Rotary Furnace
Heating Capacity - 65 Tons per Hour
Maximum Number of Billets per Hour - 300
Hearth Diameter - 62'
Hearth Width - 15'-0"
Hearth Chamber Height - 4'-0"
Zones of Heating - 5
Baffle Walls - 4
Charging and Discharging Machine Maximum Cycles per Minute – 5
Regen Burners (Bloom) Zones 3 & 4 (2008)
Regen Burners (Bloom) Zones 5 & 6 (2019)


Billet Centering Press
Piercing Capacity - 60 Tons
Maximum Stroke - 6"
Clamping Ram Capacity - 185 Tons
Maximum Stroke - 16"
Main Hydraulic Pump - 34.7 G.P.M. at 2,500 P.S.I.
Auxiliary Hydraulic Pump - 25 G.P.M. at 50 P.S.I.
Main Pump Motor - 40 H.P., A.C., 1200 R.P.M.
Hydraulic Fluid - Water Glycol
Billet Clamp Size Range - 3-3/4" to 8" Diameter
Centering Punch Diameter - 1" and 1-1/4" - Graph-Air
Modifications made to punch/bolster assy. 2005


Piercing Mill
Rotation: Looking into the Mill from the Outlet Side, Tube Rotates Clockwise
Rebuilt No. 3 Tube Mill Piercing Mill (1960)
Roll Diameter - 29"-36" Tube
Roll Face - 20"

Feed Angle - 0 to 10
Motor - 2,000 H.P., D.C.
Motor Drive - Reliance Electric
Motor R.P.M. - 250 to 465
Gear Reduction Ratio - 4.8 to 1
Roll R.P.M. - 52.4 to 97.4
Maximum Billet Length In - 15'-0"
Maximum Shell Length Out - 18'-0"
Outlet Table replaced with 3-Roll Outlet Guides in 2003 (Mannesmann-Demag)
Bar Diameter - 1-3/4" to 4-1/2"


Transval Elongator

Installed 1971 @ No. 2 Tube Mill; (Moved to No. 4 Tube Mill June, 1990)
Mill Assembly with Rolls - 26.7 Tons
Drive Assembly - 51 Tons
Roll Diameter - 14" to 18" Diameter (Standard Chocks)
Roll Diameter - 12.5" to 14" Diameter (Offset Chocks)
Roll Face - 12"
Angle of Feed - 0 to 16
Angle of Conic - 3
Motor - 2500 H.P., D.C.
Motor Drive - Reliance Electric
Motor R.P.M. - 300 - 650
Gear Reduction Ratio - 2 to 1
Roll R.P.M. - 0 to 325 R.P.M.
Maximum Shell Length In - 18'-0"
Maximum Shell Length Out - 30'-0"
Mandrel Bar Diameter - 1-3-8" - 4-1/2" Diameter
1/4" Roll Hump - 1200 Ton Roll Life
Run: High Carbon and Bearing Steels
No Stainless, Graphitic, or Sulfur
13:1 D/T Maximum (19:1 Experimental)
2-1/4" to 6-3/4" Shell Diameter Out
3-1/4" to 6-3/4" Shell Diameter In
2-1/2 - 3 Ft./Sec. Thruput - 15 Sec. Cycle

Induction Furnace
Converters - 2 - (1125KW), 1KHZ
Transformers - 2 - 1260KVA - 2400V Primary/720V Secondary
Number of Coils - 2 - 10" I.D., 130" Long Induction Heating Coils
PLC or Computer - Infrared Temperature Controlling Systems With Proportional Controller and Analog Readout
Evaporative Water System - 473 GPM Evaporative Cooler - System Includes Nonferrous Core
Pump Station - Duplex Pumps and Accessories w/Automatic Switching - Nonferrous System


Chain Transfer to Reducing Mill
Motor - 5 H.P., A.C.
Motor R.P.M. - 1,200
Gear Reduction Ratio - 31.5 to 1
Chain Speed F.P.M. - 217
Maximum Tube Lengths - 30'-0"
Minimum Tube Lengths - 10'-0"
Transfer Length - 9'-1"
Transfer Width - 30'-0"

10 Stand Reducing Mill
Roll Diameter - 14.281 to 15.161
Roll Face - 9"
Reduction Per Stand - 4%
Motor - 500 H.P., A.C.
Motor R.P.M. - 600
Roll R.P.M. - Stand No. 1 - 45.085
Roll R.P.M. - Stand No. 10 - 52.677
Average R.P.M. Increase Between Stands - 1.714%
O.D. Tube Leaving Mill - 1.900" to 6-3/4"

Rotary Sizing Mill
Rotation: Looking into the Mill from the Outlet Side, Tube Rotates Counterclockwise
Roll Diameter - 28" to 30"
Roll Face - 13"
Angle of Feed - 7 (Original) Modified to 8° - approx. 1990
Angle of Conic - 40
Motors (2) - 75 H.P., D.C.
Motor R.P.M. - 515/1,300
Gear Reduction Ratio - 9 to 1
Roll R.P.M. - 57.2 to 144.4

Tilting Hot Saw
Blade Diameter - 37-1/2" to 42"
Blade Drive Motor - 60 H.P., A.C.
Blade Drive Motor R.P.M. - 600
Saw Arbor R.P.M. - 1299
Circulating Oil Lubrication for Saw Arbor
Endless Flat Belt Drive
Tilting / Cut feed cylinder – 3” bore x 13’ stroke hydraulic

Cooling Bed
Chain, Pusher Type
Width - 31" - 6-3/4"
Length - 50'-0"
Motor - 7-1/2 H.P., D.C.
Motor R.P.M. - 500/2,000
Gear Reduction Ratio - 2552 to 1
Maximum Chain Speed - 60.2" per Minute
Minimum Chain Speed - 14.9" per Minute
Max. Shell Length 34'-0"

Hot Anneal Furnace
Hearth Width - 34'-3"
Hearth Length - 45'-9"
Motor - 3/5 H.P., D.C.
Motor R.P.M. - 400/1,600
Total Gear Reduction - 13725 to 1
Chain Travel Speed - 2.5" to 10" per Minute
Maximum Tube Length - 32'-0"
Minimum Tube Length - 10'-0"
Shuffle Bar Exit Unit
Added Flame Safe Burners in 2015

In Line Inspection Equipment
In-line DVG Hot OD Gauge (by Timken). 2 Source Gamma Ray Wall Gauge by IMS.
Installed Feb. 2011, operational July 2011.

 

In conjunction with: Galaxie Corporation and National Machinery Exchange

Location

Located in Canton , OH  

Contact

Nyk Westbrook
NWestbrook@maynards.com