• Nicholson A7-27” Debarker, 125-HP ring, 60-HP drive (2020 rebuild)

• Linden Step feeder system, 40', 4 tier, hydraulic lift, (2020 rebuild)
• 5-saw bucking line, 60” electric-drive swing bucksaws, w/encoders

• Even-ending, 5-door, pocket merchandiser log sawing cradle and outfeed
• Multiple log transfers, byproduct conveyors, chain and belt

• Adco West/Key Knife 3-face canter (left, right, bottom), temposonic positioning, SKK-driven rolls, floating-bed infeed, internal sharp chain
• Kockums 6' vertical twin band resaw 150 hp temposonic positioned

• McGehee-style multi-saw gang Edger, 6” X 48” splined-arbor gang, 150-HP
• Unused 2022 HURDLE portable sawmill, 48”-60” circular saw, 40” 2-knee x 12' carriage, 2-position tong dogs, two-strand infeed deck

• Baker 3630E single-head band resaw system, 30HP, 2-strand transfer, drop-arm log infeed, Baker BE-O Edger/strip system, Baker central power unit

• Coastal/USNR planer, 6” X 9”, Key Knife 2” and 4” side-heads 14-knife, hydraulic drive (2023 rebuild)

• TDS Technologies outfeed spray system w/ 20' chemical container (standard intermodal, with drain floor, containing tanks, pumps, screen and filter systems)
• Recently installed piping, blower, cyclone, and shavings bin (2023 install)

• 6 total 2-arm lumber stackers: (4) Linden, (1) Keystone, (1) Newman

• Signode strapping system

• External Trim line for 6’ to 8’ PET lengths:

• 2021 Precision 75” HD 6-knife (75.22) chipper (at debarker line, whole log)

• 2020 Precision 58” HD 8-knife (58-C-15) chipper (inside sawmill, residuals)

• 2016 Alliance MFG 3240 EOFR hammer hog

• BM&M 6’X12’ 2D double deck shaker screen

• (1) 2023-installed 40 unit bin (current shavings bin)
• (3) 40 unit bins (current sawdust, bark, chip bins)

• Vibra-Pro 22-foot X 18” leaf-spring vibratory conveyor w/MDI metal detector
• Mill Power 52-foot X 25” coil-spring vibratory conveyor w/MDI metal detector
• 1980 Witco 91-004 Bark separation water-bath trommel screening system (multi-section, portable)

• 2020 Hitachi ZX260F-LL6N forester
• 2015 Komatsu PC240 LL-10
• 2004 John Deere 2554

• Moveable/portable log bunks/racks for in-yard sorting (2 pair)

• 2006 Komatsu WA600-6 (111” long log clamping forks)

• 2020 Komatsu WA475-10 (short log clamping forks)
• 2019 Volvo L90H 48” (short log clamping forks)

• 2015 Komatsu WA200-7 (Jrb 55” top clamping, flat forks)
• 2014 Komatsu WA470-7 (short log clamping forks)
• 2013 Komatsu WA380-7 (PSM 45” short log clamping forks)
• 2006 Komatsu WA450-5L (121” bucket)
• 2002 Volvo L110E (48” short log clamping forks)
• 1999 Komatsu WA250-3 (48” short log clamping forks)
• 1979 Cat 988B (106-1/2” long log clamping forks)

• 2015 Hyster H210HD2

• 2020 Hyster H80FT (Fortis)
• 2012 Hyster H190FT (Fortis)
• 2003 Hyster H190HD
• 2011 Hyster H155FT (Fortis)
• 2005 Hyster H90XMS (*propane)
• Hyster H110XM (*propane)

• 2015 JLG Skytrack 10054 Telehandler
• 2020 Bobcat MT55 walk-behind skid steer
• 2014 John Deere 313 skid steer
• 2008 Genie ZX-45/25 Manlift
• 2007 Genie S-60 Manlift
• 1985 John Deere 410 Backhoe

• 2006 Fabform single axle trailer
• 1990 International 4700 Water truck (flatbed)
• 1997 Ford F-250 HD Service truck (manual)
• 1997 Dodge Ram Pick up truck
• 1973 P&H R180 18-ton hydraulic crane
• 1961 Euclid C6 Crawler dozer
• 1962 Ford F600 Flat deck truck (unlicensed)
• Peterbilt-platform, custom flat-deck short-log truck and short-log trailer
• Log trailer loading station

• 1986 Blazer Mobile Office trailer 10' X 40'
• Unitec 46090-10LP-C load cell truck scale 90'

• Various additional hydraulic log grapples available

• Primary Transformer: Hitachi/ABB Pad Mount (2023 install):

• Hitachi Capacitor Bank (BMCD-480600C60-101 - Automatic CLMD)

• Post Glover High Resistance Ground System

• Various step-down transformers, motor starters, fused disconnects, and other industrial components and supplies available
• Eaton 3,000 amp 2-section main PDC
• Siemens 2 section 9 switch PDC
• Multiple MCC units, up to 9 Section, 29 Switch
• Multiple intermodal container connex rooms available with various PLC, MCC, VFD, SoftStart, and other electrical system installations
• Multiple installed and used control and operator cabs of various sizes
• Various enclosures, electrical components, tools, and supplies available

• Allen Bradley/Rockwell CompactLogix-based control systems and components
• Various installations available,
• New, in-box spare components available: processors, HMIs, FlexIO modules,  800-T and 800-F/E switches and contact blocks, AB and AB-compatible sensors, foot-pedal switches (complete with shells, and replacement switches), enclosures
• Multiple installed and spare 800-T and 800-F/E sized control and operator panels
• Ubiquiti managed switches and discreet-wireless APs

• (5) 75-HP + (1) 150-HP Oilgear pumps (installed at sawmill)

• Independent hydraulic power units for Stud Planer and Debarker systems
• Quincy Northwest 75 HP rotary-screw air compressor (installed at sawmill)
• Rodgers 75 HP rotary-screw air compressor (installed at debarker)
• Various receiving tanks, piping, valves, and fittings available

• Armstrong #4 LH & RH bandsaw grinders

• Armstrong Bandsaw leveling bench and light table
• Armstrong #25 circular saw sharpener
• Armstrong 3-10C circular saw stretcher roll
• IMW 240 saw guide grinder/dresser (used for edger saw guides)
• Precision chipper knife tub grinder
• Babbitt pot, secondary pot, pouring and dressing station and jigs for chipper knives and saw guides
• Key Knife blade sharpener

• SC Rogers & CO Travelling bed knife grinder
• Miscellaneous filing room tools available (swedges, anvils, benches, measuring tools, jigs)
• Various surplus filing equipment and supplies available

• Quantity of log hauls up to 120’ 3 strand and up to 40’ Twin Strand
• Quantity of 4 1/2' 4 strand camelback and Twin Strand
• Large Quantity of Belt Conveyor, various sizes
• Over (20) Box Chain Conveyors, twin stand Conveyors
• Large quantities of spare chain, spare motors, Rexnord & SKK drives, sprockets, belts, pulleys, sheaves, couplers

Shop Equipment, General Purpose Tools, and Miscellaneous:

• 2021 Baileigh 200T C electric press new
• 2021 GMC GML-1660HD gap bed lathe
• 2016 Ganesh (Bridgeport-style) vertical milling machine with DRO
• Vintage Portland Machinery 24” X 120” engine lathe
• Jet JRD-700 3' radial arm drill
• Ellis 2000 metal bandsaw, Ellis 6000 stand grinder, (3) dead-roll sections
• Miller Big Blue 400 Welder Generator on custom doghouse skid (Rated output 20A./20.8 V 300A / 32 V 100% Duty Cycle)
• Various Miller, Lincoln welders
• Various 2003-2010 20’ & 40’ shipping containers, installed and loose
• (3) self dump hoppers Steel stack carts
• 2011 JLG pod lift (battery-powered)
• Ridgid pipe threader
• Multiple rolling toolboxes, tool chests, specialty tool kits
• Various power tools, hand tools, bench tools, specialty tools
• Various ladders, hoists, and strapping
• Various lots of surplus PPE and other safety supplies
• Various lots of office equipment and supplies