Hino Motors Manufacturing U.S.A, Inc
Advance Notice: Massive Sale of Complete State-of-the-Art Axle Manufacturing Facility
September 23, 2026
Type:
Auction – Webcast
Location:
Marion, AR
Date:
Sep 23, 2026
, 10:00 AM
US/Central
Preview:
Tuesday September 22nd from 9am to 4pm or by appointment.
Buyer's Premium:
20.0%
Hino Motors Manufacturing U.S.A, Inc
$0.00
Details:
Complete Axle Manufacturing Facility
- Over $450 million in original acquisition cost of state-of-the-art automotive manufacturing machinery and equipment for sale. Most equipment acquired between 2020-2024
- All Equipment is Installed and Under Power
- (4) Okuma MA-500H II Horizontal Machining Centers 2023-2024, (2) 19.69" x 19.69" pallets, 27.56" x-travel, 35.43" y-travel, 30.71" z-travel, 1.97" to 37.40" spindle center to pallet top, 2.76" to 33.46" spindle nose to pallet center, 50-taper spindle, 50 to 6,000-rpm standard spindle speed, 60-tool automatic tool changer, Okuma OSP-P300MA CNC controls, MP VR-series high pressure coolant, LNS chip conveyor, automatic pallet changer
- (6) Okuma Millac 44H II Horizontal Machining Centers, 2022-2023, single custom shaft holding table, 22.05" x-travel, 16.14" y-travel, 16.14" z-travel, 40-taper spindle, 12,000-rpm standard spindle speed, 24-tool automatic tool changer, Okuma OSP-300MA CNC controls, MP systems, high pressure coolant, chip conveyor
- (2) Okuma V760EX CNC Vertical Turning Centers, 2022, 29.92" maximum turning diameter, 31.50" maximum swing, 24.02" swing on carriage, 30.31" maximum work height, 1,100-lb maximum workpiece weight with chuck, 15.35" x-travel, 30.31" z-travel, 360-degree c-axis, 2,000-rpm spindle, 24" chuck, 12-position turret with 4,000-rpm live tool stations, Okuma OSP-P300LA CNC controls, Exomist HPM1000 mist collector, MP systems R-series high pressure coolant, chip conveyor
- (14) Okuma LU3000EX (2SC1000) 4-axis CNC Turning Centers, 2022-2023, 4-axis machine, twin turret type, 22.84" swing over bed, 39.37" maximum working length, 16.14" maximum turning diameter (upper turret), 9.84" maximum turning diameter (lower turret), 10.24" x-travel (upper), 42.72" z-travel (upper), 6.30" x-travel (lower), 39.96" z-travel (lower), 5,000-rpm spindle, 12-position upper turret, 8-position lower turret, Okuma OSP-P300LA CNC controls, high pressure coolant, chip conveyor, approximately 18,500-lbs
- (6) Enshu JE50S Production CNC Horizontal Machining Center, 500mm x 500mm x 500mm Travels, Nikken Rotary Table, Fanuc Series 18i-MB Control (2004 to 2005)
- (Tundra)
- (3) Enshu JE50S Production CNC Horizontal Machining Center, 500mm x 500mm x 500mm Travels, Fanuc Power Mate Controls (2004 to 2005)
- (Tundra)
- (3) Enshu Custom CNC Side Gear Facing Machining Center, Fanuc Power Mate Controls
- (Tundra)
- (4) Fuji TN-41TS1 Production CNC Turning Center, 10.4” X-Travel, 18.3” Z-Travel, 12-Position Turret, Fanuc Controls (2004 & 2005)
- (Tundra)
- (5) Fuji TN-41T1 Production CNC Turning Center, 10.4” X-Travel, 18.3” Z-Travel, 12-Position Turret, Fanuc Controls (2005)
- (3) Fuji MN Vertical Turning Center, Fanuc Controls
- (4) Fuji ANS-33TS CNC Turning Center, 2-Spindle Type, 900mm Max. Part Length, Fanuc 18i-T Controls (2003)
- (3) Toyoda E500 H4 Production CNC Horizontal Machining Center, Fixed Table Type, 730mm x 650mm x 850mm Travels, 40-Taper, Fanuc Series 32i-Model B Controls (2020 to 2021)
- (Tundra)
- (9) Toyoda TH555G5 Production CNC Horizontal Machining Center, Fixed Table Type, 500mm x 550mm x 530mm Travels, Fanuc Series 18i-MB Controls (2005 & 2006)
- (Tundra)
- (3) MidStates Industrial Group Custom CNC Axle Shaft Center Drilling & Face Milling Machine, Fanuc Series Oi-MF Controls (As Late As 2023)
- (3) Suntec Custom CNC Axle Shaft Center Drilling & Face Milling Machine, Fanuc Power Mate Controls (2005)
- (7) Nissin NST-30/100 2TSC CNC 4-Axis Turning Center, 400mm Turning Diameter, 1,020mm Turning Length, 2-Turrets, Fanuc Series 18i-TB Controls (As Late As 2021)
- (3) Okuma GA-36F II CNC Cylindrical Grinders, 2022-2023, 12.9" swing, 59.05" distance between centers, 11.81" maximum grinding diameter, 24" x 6" grinding wheel capacity, 25 to 600-rpm main & work spindle speeds, Okuma OSP-P300GA CNC controls, coolant
- (3) Toyoda GL6A-100 II Production CNC Cylindrical Grinder, Angle Head Type, 400mm Swing, 630mm Maximum Between Centers, Toyoda Toyopuc Touchscreen Controls (2021)
- (1) Toyoda GL6A-100 Production CNC Cylindrical Grinder, Angle Head Type, 400mm Swing, 630mm Maximum Between Centers, Touchscreen Controls (2003)
- Amino DRM1000 Center Reversing Type Die Spotting Press, 2006, 1,000-kN x 700-kN (112-us ton x 78-us ton) rated capacity, 1,300-mm (51.1") stroke, 2,000-mm (78.7") maximum daylight, 4,000-mm x 2,200-mm (157.4" x 86.6") table size, roll-in type table, light curtains, safety fencing, electrical cabinets, pit mounted
- Hitachi Zosen Fukui (H&F) TFE25000 2,810-ton transfer press (New 2005), straight side crankless top-drive type press, 25,000-kN (2,810-us ton) rated capacity, 800-mm (31.4") stroke, 250-mm (9.8") slide adjustment, (4) slide suspension points, 5,100-mm x 2,300-mm (200.7" x 90.5") slide area, (2) 5,100-mm x 2,300-mm (200.7" x 90.5") moving bolsters with hydraulic clamping, 1,300-mm (51.1") shut height, variable speed: 10 to 25-spm, (3) pneumatic counter balances all with 480-mm x 1,580-mm pad area including the following capacities: 1-stage: 230-kN to 1,200-kN, 2 & 3-stage: 160-kN to 800-kN capacity, Pro-Face touchscreen controls, light curtains & safety caging throughout, belt feeder with gantry type sheet loader with magnetic lifter, automated part removal and part stacker, electrical cabinets, pit required
- Equipped with: H&F Diestack feeder, 0.6-mm to 6.0-mm material thickness capacity, single row loading: 375-mm (180mm) x 150-mm (100mm) to 1,800-mm x 700-mm capacity, triple row loading: 375-mm x 150-mm to 500-mm x 700-mm capacity, 5,000-kg maximum stack weight, 20-kg single blank sheet capacity, 600-mm maximum stack height, 4-stacks maximum capacity
- Hitachi Zosen Fukui (H&F) BFE13000 1,461-Ton Blanking Pess & Coil Line, (New 2005), straight side crankless top-drive type press, 13,000-kN rated capacity, (4) slide suspension points, 250-mm slide stroke, 300-mm adjustment of slide, 3,000-mm x 2,300-mm slide stroke, (2) 3,000-mm x 2,300-mm moving bolsters, 300-mm bolster thickness, 1,300-mm shut height, variable speed: 15 to 60-spm, 150-kN pneumatic counter balance, upper & lower die clampers, scrap chute, 1,500-mm wide x 3,900-mm long rubber line out conveyor, 300-kg rated capacity, 132-kW main motor, electrical cabinets, pit required
- Equipped with: H&F coil feed line, including: (2) coil cars, (1) decoiler, shear, straightener and feeder, capacities: (0.6) 2.3-mm to 6.0-mm thickness capacity, 300-mm to 1,800-mm (11.8" to 70.8") width capacity, 20-ton maximum weight of coil, 700-mm to 1,800-mm (27.5" to 70.8") coil diameter capacity, 310-mm (24.0") inside coil diameter, 50-mm to 800-mm (1.9" to 31.4") feed length, 36-m/min line speed, pit mounted.
- (14) Fanuc M-710iC Material Handling Robots 2022, Fanuc system R-30iB plus controls
- (3) AdapTek A4159 Axle Shaft Laser Marking Machine (2023)
- (1) AdapTek A4246 Axle Shaft Laser Marking Machine
- (1) Omron MX-Z2050H-V1 Fiber Laser Marking Machine, 160mm x 160mm Marking Area
- (3) Ajax Tocco Pacer - T 2-stage Induction Heaters, 2023 & 2024, 3-Spindle Machine, Hardening & Tempering Stages
- (1) Lucifer 42-T36 Electric Draw Furnace, 30” x 30” x 36” Chamber
- (1) L&L Special GS1714 Heat Treat Furnace, 2350F Temperature, 12” x 14” x 12” Chamber
- (4) Neutren DFD Series Axle Shaft Induction Heater, 3-Spindle Machine, Hardening & Tempering Stages (2005)
- (4) Anderson-Cook 340-E Shaft Spline Rollers, Late As 2023
- (3) Nachi PFM-610E Series Shaft Spline Rollers, Late As 2014, M1.25 maximum module for roll forming, approximately 24" forming rack, 150-mm forming rack width, 800-mm forming rack travel, 860-mm maximum part length, 5.5" opening, Mitsubishi touchscreen controls, coolant
- (3) Kokusai FASC-S20C-33 Automatic Shaft Straighteners, Late As 2023, Pro-Face touchscreen controls, safety fencing, light curtains
- (5) Shibaoka CNC Rear Axle Housing Pneumatic Press Formers, 3-Ton Capacity (2-Tundra & 3-Tacoma)
- (5) Dai-Ichi Custom Horizontal Rear Axle Housing End Press Station, 50-kN Force, 200-mm Stroke (2-Tundra & 3-Tacoma)
- (5) Towa Seiki ASP250x320LVD-200CB Automatic Custom Rear Axle Housing Hydraulic Straightening Press, Touchscreen Controls
- (1) Towa Seiki ASP160LVD-20CCA Automatic Rear Axle Housing Straightening Cell, Pick-And-Place Load/Unload, Conveyors
- (3) Towa-Seiki ASP250LCD-150A Automatic Shaft Hydraulic Straightening Press, Touchscreen Controls
- (3) Almco PWB5-5-48E Heated Conveyor Washers, Late As 2023, Allen-Bradley touchscreen controls
- (2) Almco RTWB-20E Heated Cabinet Washers, CIRCA 2023, top loading type, 20" diameter turntable, estimated 12" maximum height capacity, Allen-Bradley touchscreen controls
- Almco RCWB-72E Heated 72" Cabinet Parts Washer, CIRCA 2024, turntable type, 72" diameter table
- Various Nikko Automatic Washers
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Information
Share contact information, store details, and brand content with your customers.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
List of Independent Contractors
As a courtesy, we provide a list of third-party rigging and machinery moving companies.
Maynards does not recommend, endorse, or assume liability for any such provider
Transportation Services:
2A Logistics (Domestic US Only)
- 1906 Riedmiller Ave, Fort Wayne, IN 46802
- Contact: Leo Aquino
- 260-408-6809 x2000 (Office)
- 908-655-5342 (Cell)
la@2a-us.com
Alliance Trucking, Inc. (Full truckload/LTL/Power Only)
- 1209 Stowe Ave, Medford, OR 97501
- Contact: Christopher "Woody" Pomeroy
- 800-977-5623 x209 (Office)
- 616-550-5286 (Cell)
- 541-734-7009 (Fax)
Chris.P@alliancetrucking.com
Arrive Logistics (Trucking, LTL, Drayage, Flatbed)
- 7701 Metropolis Dr., Bldg. 15, Austin, TX 78744
- Contact: Gabriella Mazzuca
- 224-955-1469 (Office)
- 734-502-8545 (Mobile)
gmazzuca@arrivelogistics.com
Miami Global Lines (Inland & Int’l logistics)
- 140 Ethel Rd West, Unit S&T, Piscataway, NJ 08854
- Contact: Hamid Hussaini
- 732-640-2365 x211 (Direct)
- 848-219-7924 (Mobile/WhatsApp)
HamidH@MiamiGlobalLines.com
Nova Shipping (Ocean, Air, Trucking)
(Ocean, Air, Trucking – Industrial Machinery Shipping Specialists)
- 6960 Orchard Lake Rd, West Bloomfield, MI, 48322
- Contact: Katya Dochenetz
- 248-562-7144 (Office)
- 248-818-4566 (Cell)
katya@nova-shipping.com
RAK Global Logistics
- 1549 Main St, Maynardville, TN 37807
- Contact: Brittany Canter
- 865-363-1157 (Cell)
Brittany@rakgloballogistics.com
Total Quality Logistics
- 2650 Horizon Dr SE, Unit 130, Grand Rapids, MI, 49546
- Contact: Riley Brennan
- 800-580-3101 ext 45828 (Office)
- 313-409-1416 (Cell)
rbrennan@tql.com
