Anderton Machining

CNC Horizontal Machining Centers

• DN Solutions NHP5500 CNC Horizontal Machining Center (2023): 10,000-RPM CAT 50 Spindle, 19.7" x 19.7" Pallets, 31.5" X-Axis, 29.5" Y-Axis, 35.4" Z-Axis, 60-Position Automatic Tool Changer, Fanuc Series 31i-Model B Plus Controls, KC Chip Conveyor, LNS Chip Blaster High Pressure Coolant System
• (2) Doosan HP4000 CNC Horizontal Machining Centers (08/07): 14,000-RPM Cat 40 Spindle, 16" x 16" Pallets, 60-Position Automatic Tool Changer, Fanuc Series 18i- MB Control, 23.6” X-Axis, 22” Y-Axis, 23.6” Z-Axis, Chiller System, LNS Chip Conveyor, Mist Buster Mist Collector
• Doosan HP5500 CNC Machining Center (2008):10,000-RPM, 20" x 20" Pallets , 60-Position Automatic Tool Changer, 31" X-Axis, 27" Y-Axis, 29" Z-Axis, Fanuc Series 18i-MB Controls, Coolant System, LNS Chip Conveyor
• Makino A51 CNC Horizontal Machine Center (2008): 25-HP Motor, 14000-RPM Cat 40 Spindle, 15.7" x 15.7" 2- Position Rotary Pallet Table, 22" x 22" x 23.6" XYZ Travel, 60-Position Automatic Tool Changer, Professional 5 CNC Controls, Full Enclosure, Coolant System, Chip Conveyor, Serial Number 801
• (3) Makino A71 CNC Machining Centers (2005-07): 19.7" x 19.7" Rotary Pallet, 10,000-RPM Cat 50 Spindle, 60-Position Automatic Tool Changer, 28.7” X-Axis, 28.7” Y-Axis, 31.5” Z-Axis, Chip Conveyor, Oilmatic Oil Chiller System, Professional 5 CNC Controls, Mist Collector
• Makino A81 CNC Horizontal Machining Center (2007): 10,000-RPM Cat 50 Spindle, 24.8" x 24.8" Pallets, 35.4” X-Axis, 31.5” Y-Axis, 35.4” Z-Axis, 137-Position Automatic Tool Changer, Professional 5 CNC Controls, Mist Collector, Chip Blaster High Pressure Coolant System; Chip Conveyor
• (2) Mori Seiki MH630 CNC Horizontal Machining Center: 6000-RPM Spindle, Mori Seiki MSC-502 Controls, CAT 50 Spindle, 24.5" x 24.5" Pallets, 60-Position Automatic Tool Changer, 39" X-Axis, 33" Y-Axis, 36" Z-Axis, Mist Collector, Coolant Filtration System
• Mori Seiki NH4000 CNC Horizontal Machining Center (2006): 14,000-RPM CAT 40 Spindle, 15.75" x 15.75" 2Pallets, 40-Position Automatic Tool Changer, 22.5" X-Axis, 22.5" Y-Axis, 24.8" Z-Axis, MSX-501 CNC Controls, Mist Collector, Chip Conveyor, CoolJet Coolant Chiller
• (6) Mori Seiki NH5000/50DCG CNC Horizontal Machining Center (2006-07): 8000-RPM CAT 50 Spindle, 19.7" x 19.7" Pallets, 60-Position Automatic Tool Changer, 25.6" X-Axis, 27.6" Y-Axis, 28.7" Z-Axis, Mori Seiki 701 CNC Controls, CoolJet Coolant Chiller System Chip Conveyor, Mist Collector

CNC Vertical Machining Centers

• Mori Seiki NMV5000DCG CNC 5-Axis Vertical Machining Center (2007): 12,000-RPM CAT 40 Spindle, 19.7" T-Slotted Trunnion Table, 60-Position Automatic Tool Changer, 28.7" X-Axis, 20.1" Y-Axis, 20.1" Z-Axis, Mori MSX-711III Controls, Renishaw Tool Position Locator, Chip Conveyor, Mist Collector
• Doosan VC400 CNC Vertical Machining Center (2007): 12,000-RPM CAT 40 Spindle, 19" x 28" Pallets, 40-Position Automatic Tool Changer, 22" X-Axis, 15.7" Y-Axis, 22.4" Z-Axis, Fanuc 21i-MB Controls, Chip Conveyor, Oil Chiller
• Doosan DMV3016L CNC Vertical Machining Center (2006): 17.7" x 36.2" T-Slotted Table, 8,000-RPM CAT 40 Spindle, 32-Position Automatic Tool Changer, 30" X-Axis, 16.1" Y-Axis, 20.1" Z-Axis, Fanuc Oi-MC Controls, Chip Conveyor

CNC Grinders

• Toyoda GL4i-100 Switch CNC OD Grinder (2018): 12.6" Swing, 39.4" Centers, Toyoda Post Mounted Controls, Coolant System, Magnetic Sludge Separator, 22" Grinding Wheel, Universal Grinding Head, Tailstock with Center
• Toyoda GL4A-50E CNC OD Cylindrical Grinder (1997): 12" Swing, 24" Centers, Toyoda GC32 CNC Controls, Universal Head, Coolant System, Magnetic Sludge Separator, 18" Grinding Wheel, Tailstock with Center

CNC Turning Centers

• Eurotech TTL-66-66-T1Y-TY2 CNC Turning Center (2023): Fanuc 31iT CNC Control, 15” Color Monitor, Fanuc IHMI Software, Coolant Through L Spindle, SMW-Autoblock BB-D 210 3-Jaw Chuck L/R Spindles, Work Stocker, Gantry Loader, Dual Y-Axis Turrets, Sub Spindle, Live Tools, 9.45” Swing, 20.28” Machining Length, 2” Bar Capacity
• Fuji Corporation CSD300 CNC Twin Spindle Turning Center (2018): 12.2" Swing, 3.9" Dia. Spindle, 7.9" Stroke, 10-Position Tool Turret, 4000-RPM Spindle, Fuji Touch Screen Canvas Controls, Full Enclosure; Spartan Automation Feed Unit, Chip Conveyor, 2-Position Exit Gravity Conveyor, Telesis Pin Stamp Marking System; Coolant System; Spartan Spiral Gravity Feed Conveyor, Overhead Gantry Parts Loader
• (4) SMEC CO. SL3000L CNC Turning Centers (2018-19): 3,000-RPM, 12" Diameter 3-Jaw Hydraulic Chuck, 25.6" Swing, 21.65" Centers, 12-Position Tool Turret, Power Tailstock, Tool Positioner, Fanuc Series OI-TF Controls, Chip Conveyor
• (2) Mori Seiki NL2500/700 CNC Turning Center (2006): 4,000-RPM, 10" 3-Jaw Hydraulic Chuck, 36.4" Swing, 27.6" Centers, 12-Position Automatic Tool Turret, Power Tailstock, Tool Positioner, Mori MSX-850 Controls, Chip Conveyor, Coolant Chiller
• Mori Seiki NL2500MC/700 CNC Turning Center (2005): 4,000-RPM 10" 3-Jaw Hydraulic Chuck, 36.4" Swing, 27.6" Centers, 12-Position Automatic Tool Turret, Power Tailstock, MSX-850III CNC Controls, Chip Conveyor
• Mori Seiki NL2500Y/700 CNC Turning Center (2008): 4,000-RPM 10" 3-Jaw Hydraulic Chuck, 36.4" Swing, 27.6" Centers, 12-Position Turret, Power Tailstock, MSX-850III CNC Controls, Chip Conveyor, Oil Chiller, Mist Collector
• (6) Doosan Puma V400 CNC Vertical Turning Center (2008): 3,000-RPM, 15" 3-Jaw Hydraulic Chuck, 24" Swing, 18.1" Maximum Turning Height, 12-Position Turret, Fanuc 21i-TB CNC Controls, Chip Conveyor
• (3) Doosan Puma V550 CNC Vertical Turning Center (2007): 50-HP Motor, 2,000-RPM, 24" Diameter 3-Jaw Hydraulic Chuck, 31.5" Swing, 29.5" Maximum Turning Height, 10-Position Turret, Fanuc Series 21i-TB CNC Controls, Chip Conveyor, Mist Collector
• Doosan V740TM CNC Vertical Turning Centers (2003): 40-HP Motor, 1,800-RPM, (2) 18" 3-Jaw Hydraulic Chucks, 29.13" Swing, 29.13" Maximum Turning Height, 12-Position Turrets, Work Lights, Fanuc 18i-TB CNC Control Operating Both Machines, (2) Chip Conveyors, (2) Mist Collectors
• Mori Seiki SL-250B CNC Turning Center (1997): Mori MSC-500 CNC Controls 26.8" Swing, 43" Centers, 35 to 3500- RPM, 12" 3-Jaw Chuck, 10-Position Turret, Coolant System, Chip Conveyor
• Mori Seiki SL-35B CNC Turning Center (1993): Mori Seiki CNC Controls, 23.6" Swing, 35" Centers, 25 to 2500- RPM, 15" 3-Jaw Hydraulic Chuck, 10-Position Turret, Power Tailstock, Chip Conveyor
• (2) Mori Seiki VL25A1 CNC Vertical Turning Center (1997-98): 23" Swing, 18.2" Maximum Height, 3000-RPM, 8-Position Turret, MSC518 Controls, Chip Conveyor, 12" 3-Jaw Hydraulic Chuck
• (2) Mori Seiki VL55 CNC Vertical Turning Center (1998): 31.6" Swing, 25.5" Maximum Height, 2000-RPM, 10-Position Turret, MSC-518 Controls, Mist Collector; Chip Conveyor, Remote Transformer (Not in Service, Parts Removed)

Inspection Equipment

• Gleason 475 GMS Gear Metrology System (2018): Surface Finish Package with Renishaw SP80H High Accuracy 3D Scanning Probe, GAMA 3, Linear Drive Motors, Clamshell Assembly Tailstock 50 mm – 90 mm OD, Retractable 4-Station APC, Extended 55” Z-Axis, & Tailstock Axis, 18.7” Maximum Outside Diameter, Helix Angle 0° to 89.9°, Module 0.4 to 18
• Jenoptik Opticline C614 TSP HpHS iMCS Optical Non-Contact Shaft Measuring System (2018): Measurements for Length, Diameter, Geometry Elements, Form and Position Tolerances, 5.5” Maximum Measuring Diameter, 23.6” Maximum Measuring Length,
• Zeiss Accura II 900/1600/800 Coordinate Measuring Machine (2012): 35.50" X-Axis, 63.00" Y-Axis, 31.50" Z-Axis, 14-Position Probe Holder, Light Curtain, 63" x 92" x 12" Granite Base, VAST-XTGD1 Probe Head
• Gleason M & M Sigma 3 Gear Inspection System: Tailstock, Probes, Computer, 10.6” X-Axis Travel, 18.9” Y-Axis Travel, 18.9” Z-Axis Travel
• Leco LM310-AT Micro Indentation Hardness Tester (2019): 2.5x to 100x Magnification, Color Touch Pad Controls, Semi Automatic Indentation Turret, Digital Eyepiece Capture Device, Micrometer Scale, 2-Axis Table
• LK Metris Integra Coordinate Measuring Machine (2007): 31.5" X-Axis, 27.5" Y-Axis, 23.6" Z-Axis, 41" x 46.5" x 8.5" Granite Base, Renishaw PH10 Probe Head, B&S NMC100 System Control
• Balance Research RS-15 Balancing Machine (1997): 22" Table, 360° Rotary Index Table, Palm Buttons, Computer Controlled, High Speed Balance
• Jones & Lamson Epic 30 Optical Comparator: 30" Dia. Viewing Screen, 8.5" x 32" T-Slotted Table, Quadra Chek II 2- Axis Digital Readout, 10x to 100x Magnification, Back Light
• Buehler 49-725B Automet 250 Grinder Polisher (2020): 1-HP Motor, 10" Dia. Rotary Polishing Table, Swing Head, Touch Pad Controls, 6-Position Sample Plate, 1.5" Max. Sample Size, Serial Number A25P-00227
• Struers Labotom-5 Sectioning Saw (2016): 10"Blade, Manual Saw Feed, Clam Shell Door, Push Button Controls, Coolant System
• Buehler Rockwell 574 Hardness Tester (2018): 588 to 1471-Newton Load Capacity, 11.4" Capacity, 120° Diamond Indenter, Touch Pad Digital Controls

Gear Machinery

• Bourn & Koch 1600 CNC Gear Hobber (2020): Fanuc Oi CNC Control, Coolant System, Arbor, Arbor Support, Fixtures, Chip Conveyor, 6-10 DP, 16” Maximum Outside Diameter, 36” Maximum Hob Travel
• Fellows 36-6 Gear Shaper: Spur Guide, Coolant Pump, Change Gears, 40” Maximum External Diameter, 36” Maximum Internal Diameter, 6” Stroke, 3DP
• Fellows 20-4 Gear Shaper: Spur Guide, Coolant Pump, Change Gears, 20” Maximum Gear Diameter, 4 DP, 4” Stroke
• Kashifuji KN150 CNC Gear Hobber: Fanuc Control, Coolant System, Arbor, Tailstock with Center, 5.9” Maximum Gear Diameter

Induction & Heat Treat

• Inductoheat Induction Heat Treat Machine (2001): Dual Station, Thru Coil Quench System, Investor 565 Touch Pad Pendent Mounted Controls, Water Coolant System, Power Control Panel
• Magwerks MVS2445 Ultra Black 400SA Magnetic Particle Inspection Machine (2013): 20" Swing, 48" Centers, Magnetic Current, Overhead Ventilator, Touch Pad Controls, Curtain Enclosure; Magna Flux Demagnetizer
• Pyradia R04C485157VMTFD Furnace (1996): 500° Max. Temperature, 48" x 51" x 57" Cabinet
• Pyradia R4C485157VMTGR Furnace (1990): 500° Max. Temperature, 48" x 51" x 57" Cabinet

Misceallaneous Equipment

• Acme Broach Corp PR25T-24S Hydraulic C- Frame Press: 25-Ton Capacity, Foot Pedal Control
• Hannifin F250A Hydraulic Press: 25-Ton Capacity, 20" x 20" Steel Table, 18" Stroke
• Hurco SM-1 Vertical Mill: 3-HP, 60 to 4000-RPM Variable Speed, 9" x 42" T-Slotted Table
• Kinefac MC-9 KINE-ROLLER Cylindrical Die Roller: Tri-Roll, Hydraulic Hold Down Cylinder, Hydraulic Power, Allen Bradley Controls, Coolant System, Remote Hydraulic Power Supply, Full Enclosure
• Ingersoll Rand R75N-A Rotary Screw Air Compressor (2015): 100-HP Motor, Ingersoll Rand D8501NA400W Air Dryer
• South Bend 11 X 30 Engine Lathe: 11" Swing, 30" Distance Between Centers, 30 to 1580-RPM Spindle, 6" 3-Jaw Chuck, Tool Carriage, Chip Pan
• Leco 817-000-500 MX400 Mounting Press (2020): 1.25" to 2.00" Diameter Mold Capacity, 190° to 350° Operating Temperature, Hydraulic System
• Sullair 20-1001 ACAC Rotary Screw Air Compressor (1997): 100-HP Motor, Rotary Screw Type, Full Enclosure, 60-Gallon Tank
• K.O. Lee S718-4 Surface Grinder : 6.5" x 18.5" Electromagnetic Chuck, 3450-RPM Spindle, Incremental Adjustable Head
• Kysor Johnson HA250 Horizontal Band Saw: 10" x 11" Max. Capacity, Tilting Head, Hydraulic Clamps, Analog Controls, Coolant System, Chip Pan
• Kysor Johnson HA250 Horizontal Band Saw: 10" x 11" Max. Capacity, Tilting Head, Hydraulic Clamps, Analog Controls, Coolant System, Chip Pan, Remote Transformer
• Miller Millermatic 350P Pulsed MIG Welder (2007): 350-Amp, Variable Pulse Output, MIG Gun, Cables, Torch, Portable Cart
• NSS Wrangler 3330 Floor Scrubber: Walk Behind Type, 33" Cleaning Path, 30-Gallon Solution Tank, 30- Gallon Waste Tank
• Parlec 1850-420-400 Parsetter TMM Tool Setter (2015): CAT 50 Tool Holder, Heat Shrink Tool Setting, Computer Controls, 22" Monitor, Cabinet Mount
• Toyota 7FBCU25 Fork Lift Truck (2001): 4850# Max. Load Capacity, 189" Max. Lift Height, 3-Stage Mast, 36- Volt Battery Powered, Overhead Guard, Side Shift, 48" Forks, Solid Tires
• Toyota SFBE18 Fork Lift Truck (1990): 3-Wheel, 3500# Max. Load Capacity, 106" Max. Lift Height, 2-Stage Mast, Battery Powered, Overhead Guard, Side Shift, 40" Forks, Solid Tires
• Trinco 20/CDB Dry Blast Cabinet: Clam Shell Door, Sight Window, (2) Front Access Gloves, Steel Stand, Bottom Discharge, 18" x 20" x 20" Cabinet
• Unicarriers MCP1F2A25LV Lift Truck (2018): 4700# Max. Load Capacity, 187" Max. Lift Height, 3-Stage Mast, LP Gas Engine, Overhead Guard, Side Shift, 48" Forks, Solid Tires
• Techniks 400 Heat Shrink Machine (2022): 22" Max. Reach, .125" to 1.25" Tool Diameter, CAT 40 Tool Holder, Touch Pad Controls